Finished servicing? This video shows how to put the casing back on so everything lines up properly.
Step by step
- Turn the machine onto its lid and unplug the power cable.
- Line up the polish pump, the polish hose and the water hose with the matching slots in the casing.
- Lower the casing on. It fits together neatly, like Lego.
- Plug the power cord back in at the top. There's only one place it can go.
- Check that all the screw holes line up. If the casing sits off-centre, something isn't seated in its slot properly.
- Put the four screws in finger-tight first, then go around and tighten them gently, like the wheel nuts on a car. Don't over-tighten: that can damage the machine.
- Turn the machine back over and you're done.
Need to take it apart first? See how to remove the casing.
Need a hand?
If your machine needs more than a quick fix, book a service online. For more guides, see our tech info pages.